The main purpose of a voltage stabilizer is to protect household electrical appliances from current fluctuations in the network and other important factors – impulse noise and sine wave distortion. Despite the fact that the companies responsible for the energy supply undertake to supply users with electricity of certain parameters – a voltage of 200 V plus or minus 20 V with a frequency of 50 Hz, these indicators are not met with enviable regularity. Minor fluctuations in the network are not uncommon, and sharp jumps periodically occur. Because of these devices, you have to work in extreme conditions, which as a result leads to a significant reduction in their service life.
The stores offer a significant selection of voltage stabilizers, however, in terms of their functionality, they differ greatly from each other. In addition, not all people know exactly how to choose this device. It is for them that our review of the best voltage stabilizers is intended. In the article, we will not only analyze the useful characteristics of these products, but also tell you what exactly you should rely on when buying similar equipment. Let’s start with this.
How to choose the right voltage stabilizer?
Currently, a fairly large selection of these products is presented – you can find electromechanical, hybrid and thyristor models. One of the main factors that you should pay attention to when choosing this equipment is its power, especially if the device is planned to be installed throughout the apartment. It is quite natural that its power should be about 15% more than the total power of devices that consume electricity. In this regard, you should first calculate the total amount of current used, and then add 15% to it.
It is necessary to consider exactly where the voltage stabilizer will be installed. In most cases, in an apartment building, it is located in a heated room, and in private houses – in an utility room, where, as a rule, there is no heating. You should find out if there is a need for this, whether the stabilizer can operate at sub-zero temperatures, and if it is capable of this, then to what extent. They take into account how much the voltage sags, and what the jumps are. If we neglect this moment, then sooner or later there will be such a strong jump that the device will simply burn out.
Also in the documentation for the device indicates the magnitude of the error of the device. Here you need to consider how sensitive the devices are to voltage changes. If household equipment does not react very strongly to drops, then the error can be neglected, however, many modern household appliances are filled with original electronics, which can fail even from slight fluctuations. If there are such products at home, it is necessary to purchase a stabilizer with a minimum error.
When choosing models to include in our ranking of the best voltage stabilizers, we were guided by the factors discussed earlier, and also took into account other points – user reviews and value for money. On the market there are models of various price categories: from very cheap to quite expensive. We have tried to compile an overview of the most affordable models in terms of price, so that each of our readers can choose the best model for themselves. Now is the time to start directly analyzing the performance characteristics of specific models.
Device power up to 1 kW
5. BASTION Teplocom ST-888
This product is best suited for installation in front of one or two devices. In most cases, the model is purchased by the owners of private houses, where modern electrically controlled gas boilers are installed. The maximum load power of the product is 888VA, maintains voltage stability in the range of 145 to 260V, provides full power over the entire range. Voltage stabilization is a booster type, manufactured using the latest technology. Control system microprocessor. In the event of an accident in the mains, it is turned off carefully, not allowing the sensitive microcircuits to burn out. The product restores the current supply after the voltage returns to the network. There is an LED indication of emergencies.
- Small overall dimensions;
- Easy to connect and use;
- There is an emergency indicator.
- It can only be used for one electrical appliance, so it is usually connected to stabilize the voltage of a part of the network.
BASTION Teplocom ST-888
4. Energy ARS 1000
First of all, this model is designed to reliably protect electrical appliances from amplitude fluctuations, so the device is also perfect for optimal operation with gas boilers, pumping stations and other similar devices. In this case, the device can be used both for boilers providing forced circulation, and with boilers operating with natural circulation. Performance is pretty good. The relay adjustment unit is triggered at the moment, the voltage equalization range is from 140 to 260 V. In addition, there is a multi-stage protective system that protects equipment from the effects of power surges. Information about the input and output voltage is displayed on the liquid crystal display, which also informs the user about the set operating modes.
- Optimal performance;
- Low cost;
- Compact overall dimensions and weight;
- Simply operated.
- Very bright digital display.
Energy ARS 1000
3. Voltage stabilizer RESANTA ACH-1000/1-Ts
The output voltage error of this device is minimal, and the speed of response to surges or drawdowns is impressive – about 25-30 ms. Due to this moment, the electrical products connected to the network through this device simply do not have time to respond to a change in the voltage in the network. The standard input voltage range is from 140 to 160 V. If the external indicators go beyond the specified limits, then the stabilizer simply stops the current supply, and does it so that not a single element of the connected electrical appliance burns out. In addition, protective systems are triggered if an overload, short circuit occurs in the network, or if the transformer heats up to a temperature of over 80 degrees. All elements of the device are placed in a small metal case, and the stabilizer can be used in the temperature range from 0 to 45 degrees at a humidity of not more than 80%.
- Compact overall dimensions;
- You can connect two devices at once;
- Reliable system of protection against short circuit and excessively high or low voltage;
- There is a wall mount;
- Increased hull strength.
- Cannot be placed in an unheated room.
Voltage stabilizer RESANTA ACH-1000/1-Ts
2. Powercom TCA-2000
The total power of the device is 2000 VA or 1000 W, which contributes to the reliable protection of four devices at once from the occurrence of high-voltage impulses, power surges and short circuits in the network. The function of the fuse in the device is performed by a special thermal interrupter. Also, the equipment is equipped with a passive cooling system that does not allow the internal elements to heat up excessively during operation. Without user intervention, the product is capable of stabilizing the voltage up to 220 plus or minus 5 V on its own with an input voltage range of 187 to 250 V. In order for the owner of the device to keep all processes under his full control, there is a corresponding indication represented by LEDs, there is also I have a digital voltmeter. If necessary, the stabilizer is attached to the wall or installed on the floor. Overall dimensions are compact, weight is insignificant – only 1.8 kg.
- Works very stable;
- Does not require maintenance;
- Long period of operation;
- Possibility to power four devices at once.
- In complete silence, clicks of a triggered relay are heard.
1. Quattro Elementi Stabilia W-Slim 1000
The leader of this part of our review was the original products, designed for wall placement. This device operates with a voltage in the range from 140 to 270 V and weighs 2.6 kg, the thickness of the model is only 6 cm. In addition to good functionality, this product also has an attractive and very stylish appearance, so it can also be used as a decorative element . Designed specifically to work with high-precision and capricious to voltage drops electronic devices. The product optimally showed its characteristics when powered through it by the control unit, heating boilers and Smart Home format systems. Perfectly protects products from short circuits, there is a turn-on delay mode.
- Acceptable cost;
- Turns on within seconds;
- Works great;
- Looks attractive;
- Operates absolutely silently.
- Not detected.
Quattro Elementi Stabilia W-Slim 1000
Voltage stabilizers with a power of 10 kW
5. Wester STW-10000NP
Voltage regulation in this device is carried out by switching the windings on the transformer – this is done using a special relay. You can equalize the input voltage on devices whose total power does not exceed 10 kW. This allows you to install equipment immediately after the entrance apartment shield, since the total power of all devices in the apartment is usually less than this indicator. The product has mains noise filters that do not allow changes in the current sinusoid. The device is controlled by microprocessor, a digital voltage indicator is provided, where the input and output values of this parameter are displayed. If the input current is outside the set limits, the device turns off the power. The case is durable, thanks to it all the internal components of the device are reliably protected from various kinds of physical damage.
- For its power, the product is quite affordable;
- All characteristics declared in the passport fully correspond to the actual ones;
- Works almost silently;
- It is possible to power through it all electrical appliances available in an apartment or house.
- The device is rather heavy and overall, so you need to immediately think about where to place it.
4. SUNTEK SNET-11000
Brings the input voltage to a level that is acceptable by state standards. At the same time, the device is able to function stably at a voltage of less than 120 V, in particular, during testing at reduced load, the stabilizer increases the voltage even from 70 V. However, when the voltage increases to 285-288 V, the product automatically turns off and gently de-energizes all connected devices up to until the value drops to at least 275 V. The control unit of the product is inherently a very powerful microcontroller, where the analysis of the input and output voltage is carried out, and the signals responsible for controlling the stabilizer keys are also created. Switching is carried out without any breaks. The warranty period of the device is 3 years, but the period of operation reaches at least 10 years – depending on the load and some other points.
- Excellent workmanship and assembly;
- Long period of warranty service;
- Simply superior performance;
- Not inclined to overheat even under heavy loads;
- Pretty reliable and stable device.
- A bit noisy compared to similar ones.
3. RUCELF SRWII-12000-L
The design is a single-phase device designed for domestic use. With it, you can equalize the incoming voltage in order to protect electrical equipment with a total power of up to 12 kW. This allows you to use this product even in decent-sized offices. The stabilization accuracy is no more than 6.5%. The model is also characterized by built-in microprocessor-type control, easy operation and installation. The operating temperature range is from 0 to 40 degrees, while the relative humidity should be no more than 80%. The product has an informative liquid crystal display, which displays the main data regarding the operation of the equipment, including possible errors. There are ventilation holes on the case that provide natural ventilation of the device, which prevents the device from overheating.
- Works during a drawdown or during power surges almost instantly;
- It can be used not only in domestic, but also in office conditions;
- Not very large overall dimensions;
- Stylish appearance;
- Long service life.
- It will not be possible to install the device in an unheated room.
2. Daewoo Power Products DW-TM12kVA
Able to work in a fairly wide voltage range – from 140 to 270 V. If necessary, the owner can independently control the incoming and outgoing voltage. Products are equipped with a functional color display. The device also has a special indicator, with which you can choose the right devices for connecting to the stabilizer, depending on their power. The product works on the basis of a microprocessor, due to which the stabilizer works almost instantly. Despite the fact that the product is very powerful, it works almost silently. The product has a turn-on delay function, so it will be possible to reliably protect devices such as a refrigerator, vacuum cleaner, air conditioner and so on from drops. The stabilization accuracy does not exceed 8%. There are a lot of protection systems here – from overheating, from short circuits, from too high voltage, and so on.
- Provides reliable protection against power surges;
- Operates in the range from 128 to 270 V at the input to the device;
- High level of equipment power;
- Excellent quality.
- The relays are too loud.
Daewoo Power Products DW-TM12kVA
1. Quattro Elementi Stabilia 12000
This automatic type voltage stabilizer belongs to the relay type and is designed for use in a single-phase network. Using the device, it is possible to obtain a voltage of 220 V with a deviation that does not exceed the requirements of state standards and other regulatory documents. Products are optimally suited for working with control units, the main purpose of which is water supply and heating systems, electrical appliances of various types. If necessary, several consumers can be connected to the structure at once, but their total power should not exceed 12 kW. The stabilizer is controlled by an ultra-sensitive microprocessor, it is also equipped with a digital display, which displays all the data necessary for the user. During the development, Zero Cross technology was used, due to which it is possible to significantly extend the period of use of this device.
- High degree of reliability;
- Decent equipment power;
- During the development, the most modern technologies were used;
- Quite reasonable cost.
- Not detected.
Quattro Elementi Stabilia 12000
The most accurate voltage stabilizers
5. Energotech NORMA 9000
The first thyristor-type design in our review of the best voltage stabilizers, which is able to provide the highest level of clarity and reliability of voltage stabilization. The rated power of this equipment is 9 kW – this parameter will be quite enough for a small country house or a two-room apartment, especially if powerful energy-consuming equipment is not provided there. The product is not too expensive, but at the same time it has as many as nine steps of automatic regulation of the incoming voltage, the percentage of deviation from 220 V does not exceed 7%. It also provides reliable protection against a possible short circuit, if the input voltage exceeds the specified parameters, then the design turns off on its own, the same thing happens when the transformer and power switches overheat, but the latter happens extremely rarely.
- Reliable high strength case;
- Excellent protection against power surges, short circuit;
- Quite acceptable cost;
- Compact overall dimensions;
- Suitable for both apartments and private houses.
- The instructions are somewhat confusing – it’s not as easy to understand as we would like.
Energotech NORMA 9000
4. Systems Ultra-M 9000
Can be installed on the floor or fixed to the wall. The input voltage can range from 115 to 300 V – the range is much wider compared to most other devices that fell into our review today. The maximum power is 9000 W, so quite a lot of different other devices can be connected to such a device. The stabilizer is well suited for spacious houses and apartments with a large area. Short-term overloads can last up to 5 seconds, and the product is able to withstand up to 100% overload. The frequency of the output current cannot be adjusted – it was automatically set by the manufacturer at 50 Hz, but this standard indicator is quite enough to ensure stable operation of the device for a long time. the stabilizer is a thyristor product, additionally equipped with a manual bypass built into the housing.
- Can be installed on the floor or fixed to the wall;
- High product reliability;
- The duration of the period of operation.
- On incandescent bulbs, the switching of stabilization keys is noticeable – they begin to blink a little, but on other lighting devices such a defect is imperceptible;
- High price.
Systems Ultra-M 9000
3. Energy Classic 7500
Single-phase thyristor-type wall-mounted structure designed for use in apartments, private houses, cottages and summer cottages. The main thing is that the total power of the connected devices does not exceed 7.5 kW. Output voltage accuracy is within 5% of 220W. The performance indicator for this design is about 20 ms, so the products work very quickly, there will be no extreme loads on the connected electrical appliances. The case is not too big, and due to the fastening of products to the wall, the stabilizer will not take up any free space in the room at all. The efficiency is about 98%. The device can function normally at temperatures from +10 to +40 degrees, so it must be installed strictly in a heated room.
- It is produced on the basis of single-crystal thyristors, which provide a long service life – the manufacturer claims about 60 thousand hours;
- Very high switching speed;
- Extended input voltage range;
- Interesting appearance;
- Not a very bulky product.
- Quite pricey for a stabilizer.
Energy Classic 7500
2. Leader PS10000W-50
It does not have a relay, so it works absolutely silently, besides, there is no servo drive and other mechanical elements that can wear out during operation. The device has several degrees of protection – against overheating, overload, short circuit. In addition, it has a non-volatile memory, which records the last 32 stabilizer trips due to abnormal situations, so the product is able to diagnose the causes of the trip. When the power supply is restored, the device starts automatically. The product is placed in a metal case, there is a liquid crystal display on the front side, if necessary, you can install the product on the wall.
- High level of reliability and quality;
- Extended input voltage range;
- Responds quickly to voltage changes;
- The output voltage can be adjusted if desired by the user;
- In real time, the load and temperature of the thyristors are indicated.
- The transformer hums a little during operation.
1. PROGRESS 8000TR
One of the most expensive models in our entire review of the best voltage regulators. It is used for a single-phase network, the total power of the connected devices should be no more than 6.4 kW. Stabilization accuracy will not exceed 3%. The device can operate with input currents in the range from 120 to 245 V, however, if necessary, it maintains the set parameters with input voltage deviations up to 100-260 V. The products are adapted to rather complex and difficult operating conditions. The adjustment here is stepwise, the device operates on the basis of thyristor keys. The dimensions of the product are compact, the body is made of metal, there is a liquid crystal and quite informative display.
- Carefully thought-out system of protection against short circuits and overheating;
- Consumes little electricity;
- Compact overall dimensions;
- Long period of operation.
- Except for the high price was found.
In conclusion, a useful video
This is where our review comes to an end. We have tried to inform you as much as possible about each model. If you still have questions about the models you like, then you can always ask us in the comments to the article. We will promptly respond to your every post.