Laminating paper documents is one of the most effective methods to keep them in their original form and protect them from damage. For this, special office equipment is used, called a laminator, and you can purchase a similar product for both office use and home use. With the help of such equipment, it becomes possible to laminate various commemorative papers, for example, children’s drawings, photographs, letters of thanks, and so on.
Due to the fact that this is not a very popular technique, not all users are aware of what exactly should be paid attention to when choosing and buying it. Therefore, before you purchase a laminator, you should read some useful information that will help you choose equipment. Let’s start with this, and in the future we will move on to analyzing the characteristics of the most popular models.
What indicators are most important when buying a laminator?
At the first stage, the user should decide on a number of key parameters. First of all, they determine which material will be laminated most often – plain paper, photo paper, cardboard, and so on. The largest possible format is also important. The product can be equipped with various additional functions – glossing, matting, reverse and so on.
If the laminator is purchased for home use, then choosing it is not too difficult. It is quite enough to buy a fairly simple model that will be controlled by just one key. The most optimal for the home will be a batch laminator equipped with both heating plates and hot rollers. The presence of a temperature controller in this device is not at all necessary. It is best to give preference to a mechanically controlled product – such models are quite effective in operation, but are much cheaper. An electronically controlled product is easier and more convenient to use, but it will be quite expensive.
Be sure to pay attention to the body of the device – it should not only look attractive, but also not heat up during operation. This will make the equipment safer and protect the user from burns. Not the worst option is a laminator that has an automatic shutdown function: after a while of idle time, it will turn off the power and go into sleep mode. Budget models in their work use a film whose thickness is in the range from 80 to 125 microns. This value will be quite enough to protect the document from moisture, dust and dirt, but the paper may suffer from mechanical stress.
It is not worth buying a roll-type laminator for home use – such products will be useful for regular use. These models have many settings that greatly complicate the work. In addition, such products require constant maintenance and are expensive.
Choosing a laminator for office use is much more difficult. The main rule here is not to save money. A cheap model will quickly fail or simply will not be able to cope with the functions assigned to it. Most organizations prefer bag laminators. Roll designs will be most useful to printers who constantly have to work with large print runs and decent formats. The reverse function will be very useful, because during operation the paper can be wound around the shaft, due to which the material will deteriorate, or the equipment itself will fail. With the help of the reverse, you can remove the document from the working area without damaging it and maintaining the efficiency of the equipment.
For small companies, a product equipped with an internal roller heating function will be most suitable. This equipment is able to work around the clock. In the past few years, devices with a cold lamination option have gained wide popularity, which is ideal for working with non-standard formats. Office models must be equipped with a relay responsible for temperature control, since you have to work with a film of various thicknesses.
When compiling our ranking of the best laminators, we took into account all these factors, paying attention to user reviews and the value for money of the device. We hope that after a careful study of the article, you will be able to choose the most suitable product for yourself.
Products for home use
5. DELI E3894-EU
The laminator is developed by one of the largest Chinese stationery manufacturers. The company offers customers a universal design, which is positioned as a reliable office equipment, largely due to the fact that the equipment can work with paper sizes up to A3. The number of shafts here is minimal, the power indicator is average, and the price is low. This suggests that such a technique is best used at home or in a small office with up to five employees. Judging by the performance, this equipment is quite good at printing a sheet of A3 or less, but the thickness of the material should not be more than 0.6 mm, in other words, it will not work with cardboard. The thickness of the laminating film can be in the range from 60 to 200 microns, due to which the document will acquire a fairly high density.
The product heats up quite quickly – after turning it on, it takes about three minutes, it has a reverse function. The model looks quite attractive, can work with all types of documents. The case is made of durable plastic, which does not heat up during use. It is allowed to roll no more than 10 sheets of A3 format per day, otherwise the device will have an overheating protection.
- Attractive price;
- Can work with large and non-standard formats;
- After switching on, it is ready for direct use in just three minutes;
- Suitable for a small office.
- It is allowed to laminate no more than 10 sheets daily.
4. Office Kit L2305
Initially positioned as office products, located in the middle price segment. The device is quite compact and easy to use, but with its help you can get a decent amount of work done in a short time, and the level of quality will not decrease at all. This device has all the necessary certificates, is completely safe to use. When working, he uses a film whose thickness is in the range from 75 to 125 microns. There is a cold lamination function – in this case, you will need to use a special adhesive-based film. On the front panel there are indicators of LED type – on and ready for use. This is quite convenient, since the user immediately understands when it is possible to start the process. If the material is jammed, the device can be disassembled and easily fixed. The film is superimposed very evenly, all the designations are in Russian – just to understand the operation of the device.
Cold lamination is intended for materials that are very sensitive to temperature, such as ordinary store receipts. The second and third modes are used for hot lamination, they differ from each other in film thickness and temperature. Sealing occurs not at the edges, but over the entire area of the sheet, so the finished product, if necessary, can be cut with scissors. The performance of the model is average – it heats up to working condition within five minutes, and a standard A4 sheet passes about one minute.
- Decent speed of work;
- Ability to use different materials;
- Wide range of laminating film thickness;
- Several operating modes.
- During heating, there is a slight smell;
- Short support legs that require the device to be placed on a stand to prevent overheating.
Office Kit L2305
3. Geha A4 Basic
In third place in this section of our ranking of the best laminators is a compact model that is perfect for home use. It is very easy and convenient to work with this equipment. One warms up for three to five minutes, there are two modes of operation – hot and cold lamination. The thickness of the material can use a film thickness of 80 to 100 microns. On the rear panel there is a special button that allows you to stop the rollers if you need to remove the sheet. The cooling mode is not provided here, so it will not be possible to use it for a long time, but for home conditions, its continuous operation time is quite enough. The case is made of white matte plastic, does not get dirty for a long time, dust, stains and fingerprints will not be noticeable on it. An LED indication is provided – during warm-up, it lights up red, when the laminator is ready to work it turns blue.
The rolling speed is the same regardless of the thickness of the material used. On the left side there are feet for vertical installation. As users note in their reviews, laminating in this position is not very convenient, they are rather intended more for storage, since the device will take up much less free space. Power consumption is low – it is only 265 watts. The equipment is able to work with photographs that are sensitive to high temperatures.
- Compact overall dimensions;
- Uniform speed and heating of the film;
- Long warranty period – 2 years.
- There is no cooling system;
- There is no reverse function: if the material jams, it will have to be removed manually.
Geha A4 Basic
2. GLADWORK jLAM Full
Package-type products, which are designed for use both at home and in small offices. Its overall dimensions and weight are small, so the device can be easily moved from one place to another and work with it where it is most comfortable. The product is characterized by an attractive appearance, the case is made of high-quality heat-resistant plastic with a matte finish. The assembly is excellent, there are no gaps between the body parts, there are no backlashes and extraneous squeaks. The product has a long period of operation, and during this time the quality of the finished product will be at its best. At the bottom of the laminator is a control panel, thanks to which the user can select one of five modes of use and start working.
The device heats up to operating temperature in record time – in just one minute, supports both hot and cold lamination. The system is based on four working shafts, thanks to which documents and other papers are laminated very high quality, the heating temperature is maintained at the same level. The power of the device is high – it is 850 W, due to this, a high speed of material passage is ensured, which reaches 300 mm per minute. The laminator is very reliable, all its functions are quite easy to figure out. It is able to work with films with a thickness of 60 to 250 microns.
- High speed of warming up and operation;
- Good quality of finished products;
- Small overall dimensions;
- Long period of operation.
- It costs more than similar products.
GLADWORK jLAM Full
1. Fellowes Lunar+ A4
It has a small weight – only 1.2 kg, overall dimensions are also small, especially since this device is designed to work with formats not exceeding A4. The equipment is quite simple to use, it is very easy to understand. There is only one key here – turn on. After turning on the network, a red indicator lights up, indicating that the unit has started warming up. According to the manufacturer’s specifications, it takes about 5 minutes, but in fact this time is shorter – you have to wait almost 4 minutes. When the product is warmed up, the green light comes on, you can start working. The shafts rotate quite slowly, so you have to wait a while. The thickness of the film used is in the range from 75 to 130 µm.
On the case there is another control element, which is a small lever. It is used so that the rollers can be pulled apart to remove the document along with the film. This laminator uses the latest ClearPath technology to provide the most accurate feed direction. About 20 sheets of maximum format can be passed through the device per day. This is enough for use not only at home, but also within a small office.
- Quite acceptable cost;
- Simple device;
- Good workmanship and assembly;
- Long service life;
- Unpretentiousness in service.
- During warm-up, a slight odor appears.
Fellowes Lunar+ A4
5. Pingda PD FM-360
Industrial roll-type laminator for desktop installation. It is used for both double-sided and single-sided lamination using hot and cold technology. The maximum width of the film is 360 mm, it is on an inch sleeve. This model is perfect for copy shops and printing houses. The device comes with two silicone shafts with manual clamping, there is also a knife so that you can cut off the finished product. The maximum roll diameter is 340 mm. The speed of work is very high, so you can work with large volumes. The design provides special holders for extended film length, there is a function to turn off the heating of the shaft located below.
The device was developed by a company that specializes in the manufacture of laminators, which already speaks of the high quality of products and quite reasonable cost. The film runs at a speed of up to 1.8 m per minute, perfectly adheres to the surface of the finished product, it does not appear swelling, wrinkles and wrinkled areas. The equipment occupies a minimum of free space, consumables are inexpensive: they will cost much less compared to package films. The product is quite complex, so you will have to train a special person to work with it.
- Perfect quality;
- High speed of work;
- Long service life.
- It is difficult to work with the device, this will require a specialist.
Pingda PD FM-360
4.GBC Fusion 5000L
Despite the fact that this product belongs to the office group, it works according to the package principle. The maximum product format is A3, the laminator is well suited for large volumes of work. It has a large number of useful functions, which allows you to get the highest quality products in a short period of time. The unit has compact overall dimensions, warms up in a record time for industrial equipment – in just one minute. One maximum size document will be ready in just 20 seconds after being loaded into the device. The design can work with a film thickness ranging from 75 to 250 microns.
The thickness of the package is determined automatically, after which the device independently sets the optimal settings, including the speed of operation and the heating temperature. On the front panel there is a liquid crystal control panel. If necessary, you can manually switch the thickness of the package. If the package was loaded incorrectly, the laminator will emit an appropriate beep and automatically turn on the reverse function. The system includes 4 shafts, an output tray is provided. A countdown sensor is installed, and an audible signal will let you know that the next batch can be loaded into the equipment. After half an hour of inactivity, it turns itself off.
- Attractive appearance, the body does not heat up during operation;
- High speed of warming up and speed of work;
- Long service life;
- It does not take up too much free space, allowing you to save space in the office.
GBC Fusion 5000L
3. Fellowes Proteus A3
High productivity rates are achieved due to the very fast warm-up of the equipment, it takes less than one minute, and up to one meter of paper can be passed through the shafts per minute. The CleanPath technology is applied here, thanks to which documents are captured smoothly, which prevents them from jamming. The interface of the equipment is very clear, the operator does not need to have special skills to work with it. The warranty period is two years. The manufacturer recommends the use of branded consumables to increase the period of operation of the device.
- Good work speed;
- Unique six-shaft system;
- Evenly warms up due to infrared sources.
- One of the most expensive designs in the review.
Fellowes Proteus A3
2. GMP Photonex-SYNC 235
Another batch laminator, which, according to most user reviews, can be attributed to the semi-professional class. The equipment is located in a carbon-fiber housing, which practically does not heat up during operation. In addition, there is a forced ventilation system, thanks to which it is possible to reliably protect the equipment from overheating. However, the device has a continuous run time of 4 hours, after which it will need a short break of about 40 minutes. The material and film heating system is the same as in the previous model: hot rollers, inside of which infrared emitters are built. The device works perfectly with all types of paper, their thickness can reach 3 mm, the thickness of the film used does not matter.
The design is equipped with digital step-by-step regulators of feed rate and heating temperature. The panel also has keys for calling the programmed functions. The product automatically controls the temperature of the rolls due to a special sensor. After a long period of inactivity, the product goes into standby mode, so all internal elements wear out rather slowly, and economical energy consumption is also ensured. The equipment heats up within 3-4 minutes, its power is 870 W – the average for an office device.
- Heat-resistant, not heated body made of carbon fiber;
- Long service life;
- High quality finished products.
- Except for the high price, not found.
GMP Photonex-SYNC 235
1. Bulros FGK-320S
At the top of our roundup of the best laminators is yet another package model with excellent value for money. Due to the fact that the thing is not too expensive, it will not work on a truly industrial scale. However, it is perfect for a photo studio, a small print shop and a copy center. The design can work with materials whose thickness does not exceed 2 mm. The body of the product is metal. It is designed in such a way that it is easy to get access inside to inspect the technical condition of the hot rolls, of which there are four. On the front panel there is a liquid crystal display on which the operating temperature is displayed, there are indicators indicating the inclusion and readiness for use, the activation of the reverse.
Such a tool is suitable for the use of consumables, the thickness of which can be in the range from 60 to 250 microns. The laminator warms up for 3 minutes, the sheet speed is 560 mm per minute. The equipment works very reliably, it is very easy to use, so there is no need to prepare a special person. The case gets quite hot during operation, despite the fact that there is a cooling system, so you need to be as careful as possible with it.
- Acceptable cost;
- Long service life;
- Good work speed;
- Can use different materials.
- Not suitable for large scale production.
In conclusion, a useful video
Well, our review of the best laminators designed for use both at home and in the office or even in production has come to an end. We hope that you were able to choose the most suitable product for yourself, which will become optimal during use. If you still have some questions, or want to share your experience with this equipment, then welcome to the comments. We will be happy to answer your questions, and your information will certainly come in handy for our readers.