Renovation in the bathroom is a very important and responsible job. It is important not only to correctly and evenly lay ceramic tiles on the floor and clad the walls with it, but also to carefully fill the tile joints with a special compound. Thanks to this technology, it is possible to reliably protect the main material of the walls from direct exposure to water and water vapor, to prevent the accumulation of debris and other contaminants.
There are a lot of types of grouts for ceramic tiles today – it is easy to get confused in the variety that can be found in stores of building and finishing materials. Today we will try to understand this issue so that you can easily choose the most suitable products for your bathroom. To do this, we have compiled a rating of the best tile grouts. Not only are the most popular compositions among professional finishers collected here, but also a number of useful tips on choosing the right product. If the grout is chosen correctly, then you can not only protect the walls from the damaging effects of moisture, but also hide laying defects, and also greatly enhance the aesthetic effect.
How to choose the right grout for tiles?
First of all, it should be noted that all grouts on the market are of a cement or epoxy nature. Some craftsmen often use silicone sealant instead of a similar composition. However, this is not recommended for several reasons. First of all, white sealant will not suit every tile even in color. It protects walls from moisture better than grout – there is no need to argue with this, however, it is distinguished by a higher cost and significant consumption of products, therefore, in this case, much more money will have to be spent on finishing the seams.
Cement grouts are the simplest, and besides, they have been on the market for a very long time. They include cement of the finest grinding, various plasticizers and other additives, as well as coloring pigments. You can dilute such a grout either with ordinary water or with water-based latex. The result is a rather plastic material, resembling putty in its consistency, so working with such a composition is quite simple. Such grouts are for narrow joints, the width of which does not exceed 5 mm, and for wide ones – if they are wider than 5 mm. Sand is also added to the compositions of the latter type. It will not allow the grout to crack in the future.
Epoxy grouts are much stronger than cement grouts, so they are often used where operating conditions are very harsh, for example, in baths, swimming pools, laboratories, on kitchen aprons and in other places where facing materials will be regularly exposed to water, acids, household chemicals. Such compositions are sold ready-made, they differ in a viscous consistency, and their application requires certain skills. The product consists of epoxy resin, to which various kinds of modifying additives are added – fillers, sand, and so on, there is also a hardener. The quality of the resulting seams is maintained for a very long time – for about 40-50 years.
When we chose the compositions to include in the review of the best tile grouts, all the points discussed above were taken into account. However, some other factors were also taken into account – value for money, as well as user reviews, not only experienced finishers, but also home craftsmen. We hope that the information we have collected will be enough for you to choose the most suitable product for yourself.
10 best tile grouts in 2022
10. White Hills Grout
This product is suitable not only for ceramic tiles, but also for many other building and finishing materials – natural or artificial stone, decorative masonry made of facing, red and white bricks, paving slabs. The mixture is characterized by the highest quality, after its hardening, it fits snugly to the edges of the material, does not shrink, and has a very long period of operation. In the process of drying, cracks do not form on it. It is allowed to use this grout if the joint width does not exceed 3 cm. Consumption is quite economical: when grouting small-format tiles, about 1.5-3 kg per 1 sq. m area, if large-format material is used, then it increases to 3-8 kg per 1 sq. m. The prepared mixture retains a usable consistency for a whole hour at a temperature of +20 degrees. It is not necessary to apply it with a spatula. To do this, you can use a special gun.
Level with a special spatula. The remains of the mixture after its complete drying are removed from the surface with an ordinary stiff brush. You can work with grout in the temperature range from +5 to +30 degrees, the manufacturer advises not to allow direct exposure to direct sunlight.
- Increased adhesive qualities;
- Made from environmentally friendly materials;
- Low cost of funds;
- Strong and durable coating;
- Can work with various materials;
- It perfectly resists the effects of high and low temperatures, easily withstands their differences.
- To work with the composition should be at least a little skill.
White Hills grout
9. Grout Prospectors
The first domestic production. It is of excellent quality and quite high performance. Grout perfectly resists moisture, does not allow mold and fungi to form on the main wall. During the entire period of operation, the composition retains its original color. The manufacturer offers a fairly wide selection of colors – you can choose an option for absolutely any interior design or type of tile. The grout is resistant to temperature changes throughout its entire service life. If necessary, it can also be used to create street decor – it tolerates sub-zero temperatures well. Many craftsmen finish tiles with this composition, for example, in a bathhouse or in a sauna, as it is able to withstand very high temperatures.
After drying, which takes about a day, the grout composition acquires a uniform color, however, on condition that the work was carried out with products from the same batch. The surface of the material is very smooth and pleasant to the touch – no roughness or irregularities were found. Even a fully cured composition is resistant to mechanical stress, including compression and tension.
- Acceptable cost;
- Very easy to operate;
- It is washed off from the tile with an ordinary damp sponge;
- Retains its color throughout the entire service life;
- It tolerates both high and low temperatures.
- It heavily stains hands, clogs in pores and under nails – it is recommended to work with rubberized gloves.
8. Grout PLITONIT
It is present in building and finishing materials stores in the form of a cement-based dry mix, which is used to seal the seams of facing wall and floor tiles. It should be noted that this tool is universal, as it is suitable for indoor and outdoor use, it can be used not only for ceramic products, but also for materials such as natural and artificial stone. The width of the seam should be in the range from 1.5 to 6 mm. At the same time, such a grout is also suitable for floors with underfloor heating on a water or electric basis. The seam is characterized by durability regardless of the operating conditions, since the material practically does not absorb water into itself, and can also withstand extremely low temperatures and serious drops. The result is an aesthetic surface – the seam is perfectly smooth, the composition is very easy to apply and level, largely due to the excellent plasticity of the mixture.
In order for the seam to acquire its optimal performance, work should be carried out at temperatures from +5 to +30 degrees, the mixture itself must be heated from +10 to +30 degrees. The surface to be treated must be carefully protected from direct sunlight and all kinds of precipitation. Before applying the grout, the base is completely cleaned of dirt and dust, the depth of the grout should be half the thickness of the tile or more. The solution must be used in strict accordance with the manufacturer’s recommendation, which is indicated on the package.
- Differs in universal application;
- Does not allow the development of bacteria, fungi, mold;
- Forms a perfectly smooth seam;
- Large selection of colors;
- Practically does not absorb moisture;
- It is characterized by high resistance to negative temperatures.
- Preparing a solution of the required consistency is not as easy as it might seem at first glance.
7. Grout Isomat
Another product made on the basis of cement. It can be used to fill joints, the width of which is in the range from 5 to 40 mm, it is allowed to use it both outside and inside buildings, including residential premises. Products are made on the basis of high-quality and absolutely environmentally friendly materials, which, after hardening of the grout, do not emit harmful or toxic substances into the environment. This makes the composition safe for the life and health of humans and pets. Grout has a high rate of water resistance, has an increased level of strength. The color is retained for a long time even if the products are exposed to direct sunlight. According to the manufacturer, the grout can be used as a masonry compound for fine brick laying, it can be used to fill the joints between paving stones and paving slabs.
It incorporates only the highest quality cement, a number of modified polymeric additives and fillers. Grout has a high degree of adhesion in relation to the vast majority of building and finishing materials. If desired, it is used for cladding facades, plinths, balconies, blind areas, foundations, and so on. If you plan to use the grout on highly absorbent materials, then they must first be slightly moistened.
- Sufficiently large range for various materials;
- The latest technologies are used in the manufacture;
- The texture of the material is smooth and glossy;
- After drying, it retains its color for a very long time.
- Quite high consumption;
- The price is higher compared to analogues.
6. Sopro grout
The composition is an elastic cement mass, which is intended for fairly narrow joints – their width should be from 1 to 5 mm. The grout has a water-repellent effect, so the manufacturer recommends using it in showers, baths, car washes, as well as in a number of other rooms where the lining periodically gets wet and an increased level of air humidity is observed. The product withstands both high and low temperatures well – suitable for indoor and outdoor use. In the manufacture, only mineral pigment compositions are used, which are not subject to fading under the influence of the sun and are not washed out by water. The grout has an increased level of elasticity, due to which it can be used on floors with heated water and electric types, as well as on other surfaces subject to regular and rather sharp temperature changes.
The grout has a very wide range – as many as 40 colors, so new horizons open up for design solutions. In addition, the manufacturer guarantees the identity of the selected color, regardless of whether the material belongs to the same batch or to different ones. The composition perfectly resists abrasion, practically does not absorb moisture. It is produced using the original Hydrodur technology, which also gives the product antibacterial characteristics, dirt practically does not accumulate on it.
- Very strong composition;
- After drying, it retains its color for a long time;
- Antibacterial qualities at altitude;
- Acceptable cost.
- Some users feel that the products are excessively grainy.
5. Grout Weber Vetonit
It is used for work with intertile seams from 3 to 20 mm wide. The colors are very persistent, but their choice is small – only 8 options. The product has a coarse-grained structure, so even wide seams are filled as tightly as possible. It gains the required level of strength in the shortest possible time – in just 3-4 hours it will be possible to walk on the tile. In addition, this composition is characterized by high compressive strength, frost resistance is one hundred cycles, therefore it is also suitable for outdoor work. The manufacturer does not advise processing tile joints in pool bowls and floors, which account for excessive load. With the help of such a composition, you can quickly give a finished look to the cladding, located both in the building and outside it. It has excellent antibacterial qualities, as it does not allow the occurrence of fungi, mold, and various microbes.
The seam has an attractive appearance – after drying it becomes even, smooth, acquires a uniform color, does not require jointing. During application, it does not stick to the surface of the tile, which can significantly reduce consumption. It is very easy to apply, rinse and clean, which allows you to greatly reduce the time of work. The only important point that must be taken into account when working with such a composition is that for two days the temperature of both the tile itself and the grout should be at least +10 degrees. If the environment warms up above +30 degrees, then the grout will have to be additionally moistened.
- Excellent quality composition;
- Even very wide seams can be filled;
- Easy to apply;
- Minor expense;
- Work does not take too much time.
- Not so easy to find in stores;
- A special drying technology that will have to be observed without fail.
Grout Weber Vetonit
4. Litokol color grout
The first in our review of the best grout for ceramic tiles epoxy products. It has a fairly wide scope: it can be used to create a waterproofing layer, anti-fungal treatment, and to give a finished look to a surface decorated with ceramic tiles or other finishing materials. The grout is suitable for marble, porcelain stoneware, natural stone, glass blocks and so on. Together with the mixtures, various branded additives, dyes, solvents, rinse agents and so on are supplied. In general, the product is a two-component composition. As the first component, a dry mixture of epoxy resins, fillers made on the basis of silicon materials, dyes, and so on is used. The second is an organic catalyst. A very important feature of the grout of this variety is its absolute water tightness and resistance to mold.
The products are suitable for joints with a width of 1 to 14 mm. After hardening, a very dense seam is obtained, which has excellent resistance to various kinds of deformations, it tolerates abrasion well, and is elastic. In addition, it is resistant to acid, alkali and other aggressive environments. It is allowed to use in pools or reservoirs with thermal or sea water, when facing the surface with mosaics. The result is a perfectly smooth and beautiful plane that will retain its attractive appearance for a long time.
- Excellent waterproofing qualities;
- The grout perfectly resists any cleaning compounds, regardless of the substances they contain;
- Easy to apply;
- High adhesive characteristics.
- It is very expensive;
- Without the use of a special solvent, it is almost impossible to wash such a composition.
Colored grout mixture Litokol
3. Kiilto grout
The third position is occupied by well-known Finnish products. This cement-type grout can be used for grouting between tiles that are 1-6mm wide with a minimum depth of 3mm. Products are characterized by low consumption – from 0.5 to 1.5 kg per 1 sq. m. After drying, the composition gains significant bending strength, practically does not shrink – less than 3 mm / m. Almost does not absorb water – it absorbs only 5 g in 6 hours. The prepared solution is allowed to be used within 2-3 hours. The optimum temperature regime is 18-20 degrees, however, it can also be used at +5 degrees, the relative humidity of the base should not exceed 85%.
The color range is very wide – you can choose the optimal color scheme for grouting. It is worth noting that the manufacturer also produces various kinds of aids in order to make the work easier and the result more reliable. In particular, there are special additives that can significantly improve the performance and physical properties of the base solution. Be sure to follow the dosage indicated by the manufacturer.
- Completely environmentally friendly – this is evidenced by an international certificate;
- The seam after drying the composition is even and smooth;
- The solution is ready for use for quite a long time;
- Does not scratch the tile itself;
- 32 colors;
- Not exposed to ultraviolet radiation.
- It is expensive and not found everywhere.
2. MAPEI grout
Wear-resistant, durable products, which also have high dirt-repellent properties. During service, the grout does not fade and does not begin to deform due to exposure to humidity, temperature changes, it also retains its elasticity. This is another epoxy two-component product. It dries in a fairly short time, preventing the formation of fungus. Such a mixture has shown itself well, including in fairly aggressive environments, because it does not interact with acids, alkalis, oils. Grout can be used for both interior and exterior decoration. The composition is often used in the decoration of industrial buildings and swimming pools from the inside. Grout is designed for all types of ceramic tiles, it can fill the seams between natural and artificial decorative stones. With its help, it is possible to improve the strength qualities of any coating several times over.
Translucent grout is suitable even for floors made of glass mosaic. The composition palette contains 34 different saturated colors. It should be noted that these products are often used to perform restoration work, when it is required, for example, to repair a monument or fresco. In the composition you can find a significant amount of polymers, organic components – all these substances are harmless to the human body. The prepared solution should be used within the next 45 minutes, and it is applied in a circular motion.
- Retains plasticity for a long time;
- Good resistance to abrasion;
- Not afraid of moisture, various aggressive environments;
- Large palette of colors.
- It is necessary to prepare the solution in small batches, as it retains its plasticity for only 45 minutes.
1. Grout Ceresit
The most popular grout for both home craftsmen and professional finishers. Today, there are several varieties of this product – it is selected depending on the width of the seams: up to 5 mm, up to 10 mm, from 4 to 15 mm, from 5 to 20 mm. You can also find two-component epoxy-type products on sale. All products withstand moisture well, do not allow fungus to develop and dirt to accumulate. Regardless of the type chosen, it can only be used after the tile adhesive has completely cured. If the tiles were glued to the sand-cement mixture, you will have to wait about a week. It is necessary to carefully inspect all tile edges before applying the grout – they should not have traces of grease, glue, dust. In order for the grout to better adhere to them, you can slightly moisten them. If the owner simply decided to replace the old grout, then the entire old composition will have to be carefully removed.
Unglazed tiles are often found on sale. Before using the grout, you need to make sure that the pigments do not stain its surface. The grout must be used within an hour, after which it will gradually begin to harden. It is most convenient to work with this composition with a rubber flat spatula.
- A wide selection of colors and varieties of grout;
- Quite acceptable cost;
- Easy to enjoy;
- Qualitatively protects against the occurrence of fungus and mold.
- When dried, it changes its color somewhat.
In conclusion, a useful video
So our review of the best tile grouts has come to an end. We have tried to state even rather complex things in simple language so that our readers can understand everything. We hope that now you have been able to decide which grout in 2022 will be the most optimal for you. If some questions still remain, comments on the article are at your complete disposal.